Skip to main content
QHSE Glossary

Risk Assessment

A risk assessment is a check of what in a workplace could cause injury or ill health, and of whether the controls in place are enough to prevent that harm.

Under the Management of Health and Safety at Work Regulations 1999, every employer in Great Britain must assess the risks to employees and to other people affected by the work. HSE's guidance on managing risks and risk assessment at work sets out the minimum. The employer finds what could cause injury or illness and decides how likely and how serious the harm could be. The employer then removes the hazard or, where that is not possible, controls the risk. A hazard is anything that can cause harm, such as a chemical, a ladder or a noisy machine. Risk is the chance that the hazard causes harm, combined with how severe that harm would be.

What Is Risk Assessment?

Risk assessment is the process of identifying hazards, analysing the associated risks, evaluating their significance, and determining appropriate control measures. The hierarchy of controls (elimination, substitution, engineering controls, administrative controls, PPE) guides risk reduction. Risk is typically quantified using a risk matrix: Likelihood (1-5) × Severity (1-5) = Risk Score (1-25). Scores determine priority: 1-4 Low (acceptable), 5-12 Medium (ALARP), 13-25 High (unacceptable). Risk assessments must be suitable and sufficient, recorded, communicated to workers, and reviewed regularly.

The 5 stages of risk assessment are the steps that the Health and Safety Executive (HSE) sets out for employers. First, the assessor identifies the hazards. Second, the assessor decides who might be harmed and how. Third, the assessor evaluates the risks and decides on precautions. Fourth, the findings are recorded and the precautions are put in place. Fifth, the assessment is reviewed and updated when work, people or equipment change. The stages are a general method, not a legal form; the legal duty is an assessment that is suitable and sufficient. Organisations that keep these records digitally can use risk assessment software to hold the findings of each stage and set the date of the next review.

What does a sample risk assessment show?

A sample risk assessment is a completed example that shows how the findings of a risk assessment are recorded. It is usually a table with one row for each hazard. The Health and Safety Executive (HSE) publishes a free template and example risk assessments for several types of workplace, such as an office and a warehouse. The HSE template has columns for the hazards, who might be harmed and how, and the controls already in place. Other columns record the further action needed, who carries it out and when it is needed by. The header records the company name, the assessor, the date of the assessment and the date of the next review. Many organisations also add a risk rating, often a likelihood and severity score from a risk matrix. HSE warns that copying an example and adding a company name does not satisfy the law. Each assessment must reflect the hazards and controls of its own workplace. A sample is a guide to the format and the level of detail, not a substitute for the assessor's own findings.

What is a dynamic risk assessment?

A dynamic risk assessment is an assessment of risk made on the spot, while a task or incident is under way and conditions change faster than a written assessment can follow. The UK fire and rescue service uses the term widely. The National Fire Chiefs Council describes it as the assessment of risk in a rapidly changing environment, often with incomplete or inaccurate information. The person in charge looks for new hazards, judges the risk, applies or changes control measures and repeats the check as the situation develops. A dynamic risk assessment does not replace the written risk assessment that the Management of Health and Safety at Work Regulations 1999 require. It works inside that assessment and deals with the hazards that it could not foresee. When time allows, a more detailed assessment is recorded, and the lessons go back into the written risk assessment.

Risk Assessment Requirements Under UK Law

Regulation 3 of the Management of Health and Safety at Work Regulations 1999 requires every employer to make a suitable and sufficient assessment of the risks to employees and others. These regulations apply in Great Britain. Northern Ireland has its own version, the Management of Health and Safety at Work Regulations (Northern Ireland) 2000. Other regulations require their own assessments, such as COSHH Regulation 6 for hazardous substances, the Manual Handling Operations Regulations 1992, the DSE Regulations 1992, PUWER 1998 and LOLER 1998. An employer that fails to assess risk can receive an improvement notice or a prohibition notice, and serious cases can lead to prosecution, unlimited fines and imprisonment. In 2024/25, HSE issued over 4,400 notices for all types of breach. About 3,200 were improvement notices and about 1,200 were prohibition notices, according to the Health and Safety Executive Annual Report and Accounts 2024/25.

How does a risk assessment choose its control measures?

A risk assessment chooses control measures by working down the hierarchy of controls, from the most effective option to the least. The first choice is to eliminate the hazard. Where that is not possible, the assessor substitutes something less hazardous, then adds engineering controls such as guarding or local exhaust ventilation. Administrative controls, such as safe systems of work and training, come next. Personal protective equipment is the last line of defence for the risk that remains. ISO 45001 sets out this order in clause 8.1.2, and UK law's principles of prevention also put collective measures before personal protection. In Q-Hub's risk management tools, the risk register records each control and the residual risk after it.

Key Components of Risk Assessment

  • General risk assessment
  • COSHH assessment
  • Fire risk assessment
  • Manual handling assessment
  • DSE assessment
  • Noise assessment
  • Vibration assessment
  • Working at height assessment
  • COMAH safety report

What does a scored risk assessment example look like?

A scored risk assessment example shows how one hazard moves through the five stages and the 5×5 risk matrix described above. The figures below are sample data for a fictional UK warehouse, not a real site.

  1. Hazard: forklift trucks and pedestrians share one aisle in the despatch area.
  2. Who might be harmed: warehouse staff, delivery drivers and visitors who walk through the area.
  3. Risk before new controls: likelihood 4 × severity 5 gives a score of 20, which is high.
  4. New controls: a marked pedestrian walkway with barriers and a one-way route for the trucks.
  5. Residual risk: likelihood 2 × severity 5 gives a score of 10, which is medium. The assessor records the result and sets a review date.

The severity score stays at 5 because the controls make a collision less likely but do not make one less serious. The assessment is reviewed after an incident, a change to the layout or the arrival of new equipment.

How are risk assessments kept in Q-Hub?

Q-Hub is QHSE management software. Its risk assessment module holds risk assessment records in the same system as document control, audit management and training records.

Sources: the laws and HSE pages named on this page, checked on 20 November 2026.

Related Terms


Want to see how Q-Hub handles Risk Assessment in practice? Book a demo or see pricing.

RIDDOR Back to Glossary Root Cause Analysis